TM 9-2350-267-10
COMMANDERS SEAT - Continued
2 Footrest Adjustment. Remove
quick-release pin (2). Slide
footrest in or out to desired po-
sition. Aline holes in inner and
outer footrest tube and install
quick-release pin (2).
To avoid Injury, sit on seat to
apply downward pressure on
seat before adjusting height-
adjusting handle.
CAUTION
Do not use handle guard (4)
for lifting; it is meant to pre-
vent accidental actuation of
the handle (3).
3. Seat Height Adjustment. Apply
downward pressure to seat and
pull adjusting handle (3) for-
ward. Increase or decrease
pressure to lower or raise seat
height. When desired height is
achieved, release handle and
slowly release pressure until
seat locks into position.
2-109