9-2350-261-34
T M
32.
33.
34.
35.
Disconnect connector (1) from dimmer
switch (2).
Remove four screws (3) and cover (4) from
four locknuts (5) in drivers compartment
bulkhead. Discard locknuts.
Remove two screws (6), lockwashers (7), and
clamps (8) that secure harness (9) to two
weldnuts (10). Discard lockwashers.
Pull harness (9) through bulkhead into driv-
ers compartment.
N O TE
Do not disconnect circuit 641.F lead on
range selector.
36.
37.
Disconnect circuit 14 lead (11) and circuit
14A lead (12) from range selector
leads (13).
Remove cradle clip ( 14) and harness (9)
from cradle ( 15).
6-38