TM 9-2350-261-34
21. Remove three cradle clips (1) and front main
24. Disconnect two connectors (11) from voltage
wiring harness (2) from three cradles (3).
regulator (12).
22. Remove three screws (4), washers (5),
N O T E
clamps (6), and harness (2) from three
If you need to remove voltage regulator,
weldnuts (7).
do step 25. Otherwise, go to step 26.
23. Remove 16 screws (8), nuts (9), and
25. Remove four screws (13), eight lockwashers
four connectors (10) from drivers bulkhead.
(14), and regulator (12) from four
weldnuts (15). Discard lockwashers.
26. Remove two clips (1) and harness (2) from
two cradles (3) inside drivers compartment.
INSIDE DRIVERS
COMPARTMENT
INSIDE DRIVERS
COMPARTMENT
6-36