REPLACE SMOKE GENERATOR FUEL CAN LID ASSEMBLY (M1059 ONLY) -- Continued
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
Coat fuel pipe (1), check valve (2), and vent, supply, and return elbows (3), (4), and (5) with sealing compound.
Install check valve (2) on lid (6).
Install fuel pipe (1) in lid (6).
Install two gaskets (14) and fuel lid closure (15) on lid (6).
Install lid (6) in fuel can (7).
Install vent elbow (3) in lid (6).
Install supply elbow (4) in lid (6).