CLEAN, INSPECT, AND REPAIR
Dry cleaning solvent
P-D-680 is toxic and
flammable. Always use in
an open area with good air
flow, away from sparks,
heat, or flames. Wear
goggles and gloves. Do not breathe
vapors. Avoid contact with skin, eyes, and
clothes. If you get dizzy while using
solvent, breathe fresh air and get medical
help. If solvent gets on hands, wash them.
If solvent gets in eyes, flush eyes with
fresh water and get medical help
immediately. Keep fire extinguisher
5. Clean shaft, universal joints, yoke, screw
mounting holes and attaching hardware with
dry cleaning solvent.
Early failure due to wear will occur if you
wash lubricant out of universal joint
6. Inspect shaft and universal joints for wear,
deep scratches, grooves, and cracks. Remove
minor scratches and grooves. Replace part if
damage cannot be repaired.
7. Inspect yoke for chipped, worn, and burred
splines. Remove minor scratches and burs.
Replace yoke if damage cannot be repaired.
8. Clean mounting surfaces of shaft to ensure
GO TO NEXT PAGE