TM 9-2350-261-20-1
1.
2.
3.
4.
Raise faceplate (1) and secure to enclosure with ten new
lockwashers (2) and screws (3).
Set MASTER SWITCH to ON. Set vehicle
BLACKOUT LIGHT to ON. Be sure ramp door is open
(see your-10).
Apply AC power to SICPS system. Set BLACKOUT
ENABLE switch (4) on Power Control Enclosure panel
in upward position (TM 11-7010-256-12&P).
Do fluorescent lights illuminate?
1. Verify no faults found.
1. Faulty relay XK5.
2. Notify your Supervisor.
3-226.65
---.--= .
.-. ~==.
.-=-
----