TM 9-2350-261-20-1
1. Has light assembly fuse been replaced?
NO
1. Replace fuse
(see TM 10-5410-229-13&P).
YES
2. Verify no faults found.
.
1. Has fluorescent lamp(s) been replaced?
1. Replace lamp
(see TM 10-5410-229-13&P).
1. Remove all power (see your -10 and
TM 11-7010-256-12&P).
2. Remove cable W11, plug P17 (1) from power control
enclosure jack J37 (2).
3. Apply AC power and set AC LIGHTS and BLACKOUT
ENABLE switches to upward position
(see TM 11-7101-256-12&P).
4. Measure voltage between sockets A and B of jack
J37 (2).
5. Does multimeter read 110 volts AC or more?
2. Verify no faults found.
1. Go to: No Power To AC Cir-
cuits (page 3-226.97).
GO TO NEXT PAGE
Change 3
3-226.67