I N S T A L L T R A C K S H O E (cont)

TM-9-2350-261-10 Recovery Vehicle Full Tracked: Medium M88A1 NSN 2350-00-122-6826 Winch Power Takeoff and Hoist System Manual
Page Navigation
390

TM 9-2350-261-10 5. Coat track pin with oil or grease. Install nut flush on track pin. Use 1/2 inch drive socket handle and 11/16 inch socket. 6.Place track shoe in lower part of track. Align track pin holes. 7. Obtain 20 degree angle between track shoe to be connected. 8. Install track pin in track shoe. 9. Join track (page 3-24). 10. Install nut on track pin. use 1/2 inch drive socket handle and 11/16 inch socket. 11. Adjust track tension (page 3-21). 12. Mark nut so unit maintenance can torque it. Fill out DA Form 2404 to notify unit maintenance to torque marked track pin nuts. END OF TASK 3-32

Privacy Statement
Press Release
Contact