TM 9-2350-247-20-3
REPLACE NOZZLES, TUBES, AND FITTINGS (NEW CONFIGURATION) Continued
0524 00
6.
Install tube (15) on tee (9).
7.
Install three screws (16), washers (17), and new lock nuts (18) securing three clamps (19) to carrier bulkhead.
8.
Install two nozzles (20) on tube (15) and tube (10).
FOLLOW-THROUGH STEPS
1.
Lower center seat (see your -10).
2.
Connect battery negative lead (WP 0292 00).
3.
Lower drivers seat (see your -10).
END OF TASK
0524 00-4