TM 9-2350-247-20-3
REPLACE NOZZLES, TUBES, AND FITTINGS (OLD CONFIGURATION) Continued
0525 00
INSTALLATION
1.
Install boot (1) on carrier bulkhead.
2.
Install screw (2), washer (3), clamp (4), and new lock nut (5) on carrier bulkhead. Insert tube (6).
3.
Tighten nut (7) that secures tube (6) to cylinder (8).
4.
Install screw (9), washer (10), clamp (11), and new lock nut (12) on carrier bulkhead.
5.
Install nozzle (13) on tube (6).
FOLLOW-THROUGH STEPS
1.
Lower center seat (see your -10).
2.
Connect both battery negative leads (WP 0292 00).
3.
Lower drivers seat (see your -10).
END OF TASK
0525 00-2