TM 9-2350-247-20-3
REPLACE TURN SIGNAL FRONT WIRING HARNESS Continued
0511 00
6.
Remove connector (1) from switch (2) on back of instrument panel (3).
7.
Disassemble connector (1). Remove circuit 22 and 460-461 leads (4 and 5) from connector pins C and J, respectively.
Use soldering gun. Pull leads from connector.
8.
Remove circuit 22-461 lead (6) behind connector (1).
9.
Disconnect circuit 22-460 lead (7) at trailer wiring harness (8).
10. Remove screw (9) and nut (10) that secure two retainers (11) to bushing (12). Remove circuit 22-460 lead (7) from
bushing and pull lead through two retainers.
0511 00-3