TM 9-2350-247-20-3
REPLACE TURN SIGNAL FRONT WIRING HARNESS Continued
0511 00
3.
Unscrew nut (7) that secures bushing (8) in stuffing tube (9). Slide bushing (8) down on leads and remove circuit 460 and
461 leads (1) from right and left headlight wells, respectively.
4.
Remove screw (10) and two lock washers (11) that secure ground lead (12) to flasher unit (13). Disconnect connector
(14) from flasher unit. Discard two lock washers.
5.
Remove connector (15) from control assembly (16).
0511 00-2