TM 9-2350-247-20-2
REPLACE CAB DOME LIGHT -- Continued
0279 00
7.
Turn two bulbs (10) to the left and remove from two sockets (11).
INSTALLATION
1.
Install two bulbs (10) in two sockets (11) and turn to the right to secure.
2.
Install new seal (9) in lens retainer (8).
3.
Align lens retainer (8) with dome light body (5).
4.
Tighten eight captive screws (7) in lens retainer (8) and dome light body (5).
5.
Align dome light body (5) with four weld nuts (6).
6.
Install eight new lock washers (4) and four screws (3) in dome light body (5) and secure to four weld nuts (6).
7.
Connect circuit 38 lead (1) to connector (2).
FOLLOW-THROUGH STEPS
1.
2.
Check cab dome light for proper operation (see your -10).
END OF TASK