TM 9-2350-247-20-2
REPLACE FUEL CONTROL SHAFT AND LINKAGE (M548A3) -- Continued
0202 00
INSTALLATION
1.
Install fixed gauge (1) on fuel governor housing (2). Secure with two new lock washers (3), washers (4) and screws (5).
2.
Place sleeve bearing (6) under lower bracket (7). Secure with two screws (8), four washers (9), and two new lock
nuts (10).
3.
Install machine key (11) on the end of shouldered shaft (12) without threads.
4.
Install shouldered shaft (12) with key through top bracket and slide lower connecting link (13) on the bottom of
shouldered shaft (12). Slide shouldered shaft end with lower connecting link into lower sleeve bearing (6).