TM 9-2350-247-20-2
REPLACE FUEL CUTOFF HAND CONTROL (M548A1) -- Continued
0194 00
REMOVAL
1.
Remove nine screws (1), lock washers (2), and clamps (3) from weld nuts (4). Discard lock washers.
2.
Remove nine clamps (3) from fuel cutoff control cable (5).
3.
Loosen two setscrews (6) in retainer collars (7). Remove fuel cutoff control cable (5) from collars and link pin (8).
4.
Remove adjustable strap (9) from fuel cutoff control cable (5).
5.
Loosen nut (10) securing fuel cutoff control cable (5) and washer (11) to instrument panel (12).
6.
Remove two lock nuts (13), screws (14), and one clamp (15) from adapter (16). Discard lock nuts.
7.
Pull fuel cutoff control cable (5) through nut (10), washer (11), adapter (16), and grommet (17).
8.
Remove cotter pin (18), washer (19), and link pin (8) from engine stop lever (20). Discard cotter pin.