REPAIR FUEL COMPARTMENT EXPANSION CHAMBER (SEALING) -- Continued
REPAIR OR REPLACEMENT
Diesel fuel and polyurethane coating are flammable. The following task should be performed
outdoors with no smoking.
Allow polyurethane coating to dry completely before refilling fuel tank.
Plug small vent (1) on tee (2).
Connect hose (3), about 18 inches (46 cm) long, to bottom of tee (2). Allow hose to protrude through taillight hole.
Carefully plug open end of hose (3).
Pour 1 gallon (4 L) polyurethane coating through small hole (4) in top of hull wall.
Place container under end of hose (3). Remove plug and allow polyurethane coating to drain from expansion chamber.
Remove hose (3) from bottom of tee (2).
Unplug small vent (1) on tee (2).