TM 9-2350-247-20-2
REPLACE AIR SEPARATOR TO FUEL TANK TUBES, HOSES, AND FITTINGS (M548A1)
0172 00
-- Continued
12. Install nut (1) on elbow (2). Install new preformed packing (3), retaining ring (4), and elbow (2) on flange in fuel
compartment (5).
13. Install tube (6) on elbow (2). Tighten nut (7).
14. Install 7 straps (8) and rubber strips (9) on blocks (10) with 14 screws (11) and new lock washers (12).
FOLLOW-THROUGH STEPS
1.
Refuel carrier (see your -10).
2.
3.
Start engine (see your -10).
4.
Check for leaks.
5.
Stop engine (see your -10).
6.
7.
Install power plant rear access door (see your -10).
8.
Install power plant lower rear access cover (see your -10).
9.
Install cargo compartment floor plates (WP 0393 00).
END OF TASK
0172 00-7/8 blank