TM 9-2350-247-20-2
REPLACE AIR SEPARATOR TO FUEL TANK TUBES, HOSES, AND FITTINGS (M548A1)
0172 00
-- Continued
5.
Install fuel tank to crossover tube (10) and pump tube (11).
6.
Attach crossover tube (12) to elbow (13). Tighten nut (14).
7.
Install new seal (15) and pickup tube (16) on elbow (13) and tighten nut (17).
8.
Install adapter (18) on crossover tube (10). Tighten nut (19) and nut (20). Secure crossover tube (12) to four weld nuts
(21) with four screws (22), new lock washers (23), and clamps (24).
9.
10. Install new seal (25) on tube (26), and push through bulkhead. Install adapter (27), nut (28), and hose (29) on tube (26).
Tighten nut (28) and nut (29).
11. Attach tube (26) to bracket with two clamps (30), screws (31), and nuts (32).
0172 00-6