TM 9-2350-247-10
REMOVE/INSTALL TRACK PAD Continued
0061 00
3.
Mark pad and notify unit maintenance so they can torque nut properly.
REPLACE BUMPER MOUNTED TRACK PAD
NOTE
Install worn track pads on the rear bumper to have spare track pads available and to help
protect the carrier and anything you might back into.
1.
Remove track pad from bumper by unscrewing nut and taking track pad off. Use socket wrench handle and 15/16 inch
socket wrench.
2.
Install track pad on rear bumper and tighten nut to secure track pad in place. Use socket wrench handle and 15/16 inch
socket wrench.
END OF TASK
0061 00-2