| |
TM 9-2350-287-34
592. COOLING FAN DRIVE ASSEMBLY REPAIR (continued).
4.
Remove retainer (14) and gear shaft (17) from
sleeve (18).
5.
Remove preformed packing (23) and seal (22)
from retainer (14). Discard preformed packing and
seal.
6.
Straighten locking tabs on key washer (20), and
remove nut (21 ) and key washer (20) from gear
shaft (17). Discard key washer.
NOTE
Perform step 7 only if spacer or bearings fail
inspection.
7.
Remove bearing (19), spacer (15), and bearing
(16) from gear shaft (17).
8.
Repeat steps 3 through 7 for remaining bevel
gearcase assembly.
9.
Remove Iockwire (27), four screws (26), cover (25), and gasket (24) from fan drive assembly (3). Discard
gasket and Iockwire.
5-3
|