|
| |
TM 9-2350-287-34
3-2. ENGINE ASSEMBLY REPLACEMENT (continued).
4.
Remove two screws (10), nine screws (14), three screws (16), and 14 Iockwashers(11) and washers (12) from
transfer assembly (15). Discard Iockwashers.
5.
With the aid of an assistant, raise lifting device and remove engine (1) from transfer assembly (15).
6.
Remove gasket (13) and shouldered shaft (17) from engine (1) or transfer assembly (15). Discard gasket.
7.
Remove 12 screws (21), mass ring (20), flexible coupling (18), and preformed packing(19) from flywheel (22).
Discard preformed packing.
3 - 3
|
