| |
TM 9-2350-287-34
11-4. HYDRAULIC ACTUATOR REPAIR (continued).
CAUTION
7.
Make sure threaded ends of piston rod are protected. Damage to piston rod can result
if threaded ends are not protected.
Remove piston rod (14) from actuator housing (15).
8.
With assistant securing piston rod (14) from turning, remove piston retainer (19) from piston head (17).
9.
Remove two retainers (18) and packing (20) from piston retainer (19). Discard retainers and packing.
10.
Remove piston head (17) from piston rod (14).
11.
Remove two retainers (16) and T-seal (21) from piston head (17). Discard retainers and T-seal.
11-14
|