|
| |
TM 9-2350-287-34
10-2. BILGE PUMP REPAIR (continued).
11.
Install new snapring (13) and plate (14) on bilge pump (7). Secure plate (14) with four new Iockwasher (15)
and four screws (16).
12.
Install three new shaft seals (20) in seal cover (21). Install new gasket (12) on seal cover (21), and install seal
cover (21) on bilge pump (7).
13.
Secure seal cover (21) with four new Iockwashers (17) and four screws (18).
14.
Install impeller housing (19) on bilge pump (7).
15.
Install impeller (8) on bilge pump (7). Using face wrench socket, secure impeller (8) with nut (10) and new
Iockwasher (9).
16.
Install impeller cover (3) and inlet screen (11) on bilge pump (7) and secure with four new lockwashers (2) and
four screws (1).
17.
Install four new brushes (4), new preformed packings (6), and brush caps (5) on bilge pump (7).
FOLLOW-ON MAINTENANCE:
• Install bilge pump (refer to TM 9-2350-287-20-2).
10-7
|
