| |
TM 9-2350-287-34
9-4. PROJECTILE RACK SECTION REPAIR (continued).
4.
5.
6.
7.
8.
9.
10.
11.
12.
Remove four shoulder screws (6) from pivot plates (7).
Remove two pivot plates (7) from projectile rack section (13).
Remove upper locking plate (8) with support (12) attached, from projectile rack section (13).
Remove two Iockwires (11) from upper support bar (12). Discard Iockwires.
Remove two screws (10) and washers (9) from upper support bar (12).
Remove upper support bar (12) from upper locking plate (8).
Remove two Iockwires (11) from lower support bar (12). Discard Iockwires (11).
Remove
Remove
two screws (10) and washers (9) from lower support bar (12).
lower support bar (12) from lower locking plate (8).
9-14
|