| |
TM 9-2350-287-34
6-2. RECTIFIER MAINTENANCE (continued).
8.
Remove nut (28), Iockwasher (29), washer
(30), and two electrical leads (31 and 32) from
ground terminal (35). Discard Iockwasher.
9.
Remove three screws (27), washers (26),
and Iockwashers (25) from negative bus bar
(24). Remove negative bus bar (24) from
three diode assemblies (43). Discard
Iockwashers and reinstall washers and
screws.
10.
Remove washer (33), two Iockwashers (29)
and nuts (34), and ground terminal (35) from
housing (10). Discard Iockwashers.
11.
Remove three screws (37), washers (36),
and Iockwashers (25) from positive bus bar
(41). Discard Iockwashers.
12.
Remove nut (38), Iockwasher (39), washer
(40), and positive bus bar (41 ) from terminal
stud (42).
Remove two washers (40),
Iockwashers (39), and nuts (38) and terminal
stud (42) from housing (10). Discard
Iockwashers.
13.
Remove six screws (45) and Iockwashers (44) and three diode assemblies (43) from housing (10). Discard
iockwashers.
6-4
|