| |
TM 9-2350-287-20-2
13-2. TOWING PINTLE REPAIR (continued).
5.
Remove pin (10), latch (16), and spring (18) from pintle body (6).
6.
Remove pin (17) from latch (16).
7.
Remove fitting (9) from pin (10).
8.
Remove fitting(19) from bracket (3).
c.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT use near open flame or excessive heat.
1.
Clean all parts with drycleaning solvent and rag. Allow parts to air-dry.
2.
Measure spring (18). If spring is less than 3 inches (7.6 cm) long, replace it.
3.
Clean grease holes in two pins (10 and 13) and bracket (3).
13-3
|