|
| |
TM 9-2350-287-20-2
12. APU ENGINE OIL FILTER.
NOTE
Oil fitter must be changed when APU crankcase oil is changed. Filter should be
replaced more frequently when the vehicle is operating in dusty conditions.
If necessary, move left projectile rack assembly to rear of vehicle (refer to TM 9-2350-287-10), and remove APU
compartment access plate (para 15-39). Remove filter (33) from the APU, and discard filter.
Lightly lubricate gasket of new filter (33) with oil. Install fitter (33) on the APU and tighten filter (33) until gasket contacts
lip of mounting stem; then tighten filter an additional one-half turn.
Start APU engine (refer to TM 9-2350-287-1 O), and check for oil leaks around filter (33). Tighten filter (33) if necessary
if leaks occur. Install APU compartment access plate (para 15-39), and move left projectile rack assemblv to front of
vehicle (refer to TM 9-2350-287-10).
G-15
|
