|
| |
TM 9-2350-287-20-2
– K E Y –
Expected Temperatures
Lubricants
Capacities
Intervals
Above 15° F
+40°F to -10°F
+40°F to -65°F
(Above -9°C)
(+4°C to -23°C)
(+4°C to -54°C)
OE/HDO
(MIL-L-2104D)
Intervals are
L U B R I C A T I NG
as follows:
OIL, lnternal Com-
S - Semi-
bustion Engine,
annually
Tactical Service
Intervals are
based on
Transmission
normal hours
Breather
of operation
and moderate
o p e r a t i n g
Final Drive Breather
conditions.
Final Drive
2 qt
(1.8L)
OE/HDO
15W40
NOTES:
6. TRANSMISSION BREATHER. Remove breather (18) from transmission (19) (para 3-10), and clean with dry-
cleaning solvent. Use compressed air to thoroughly dry breather (18), then dip breather (18) in oil and install in
transmission (19) (para 3-10).
7. FINAL DRIVE BREATHERS. Remove breather (21) from left and right final drives (20). Clean two breathers (21)
with drycleaning solvent. Use compressed air to thoroughly dry breathers (21), then dip breathers (21) in oil and install
in left and right final drives (20).
8. FINAL DRIVE AND REFILL. Remove both level-check plugs (22) and both drain plugs (23). Clean drain plugs (23),
apply Teflon antiseize tape to threads, install drain plugs (23), and add oil at level-check plug opening (see key for
required oil type). Clean level-check plugs (22), apply Teflon antiseize tape to threads, and install level-check plugs
(22).
G-7
|
