|
| |
TM 9-2350-287-20-2
22-5.
HOSE ASSEMBLY REPLACEMENT (continued).
8.
Disconnect hose (70) from air purifier (9).
9.
Remove clamp (78) and quick-disconnect coupling (77) from hose (70).
h.
DRIVER’S STATION HEATER TO CONNECTOR HOSE ASSEMBLIES INSTALLATION
1.
Install quick-disconnect coupling half (77) on hose (70) with clamp (78).
2.
Connect hose (70) to air purifier (9).
3.
Secure hose (70) to bulkhead with two straps (14), washers (13), new Iockwashers (12), and screws (11 ).
4.
Install two hoses (66 and 70) on tube coupling (76) with two clamps (75).
5.
Position hoses (66 and 70) behind two harness guard (7 I ), and secure two harness guards (71) to bulkhead
with seven washers (72), new Iockwashers (73), and screws (74).
22-19
|
