|
| |
TM 9-2350-287-20-2
22-5.
HOSE ASSEMBLY REPLACEMENT (continued).
10.
Remove two clamps (31 ) and hoses (22 and 30) from tube coupling (31). Discard clamps.
11.
12.
b.
1.
2.
3.
Disconnect hose (30) from orifice connector (33).
Remove clamp (35) and quick-disconnect coupling half (34)
from hose (30). Discard clamp.
COMMANDER’S STATION HEATER TO CONNECTOR
HOSE ASSEMBLIES INSTALLATION
Install quick-disconnect coupling half (34) on hose (30) with
new clamp (35).
Connect hose (30) to orifice connector (33).
Install two hoses (30 and 22) on tube coupling (32) with two
new clamps (31 ).
22-10
|
