|
| |
TM 9-2350-287-20-2
21-16. AFES MANUAL DISCHARGE SYSTEM REPAIR (continued).
24.
b.
1.
2.
3.
4.
5.
6.
c.
1.
2.
3.
4.
5.
6.
7.
Remove crew fire extinguisher No. 4 cable
(62) and engine fire extinguisher No. 2 cable
(64) from two brackets (63). Remove two
cables (62 and 64) from vehicle.
DISASSEMBLY
Compress and remove spring (70) and two
spring guides (71 ) from actuator assembly
(3).
Remove two shouldered screws (72 and 73)
and arm (74) from actuator assembly (3).
Remove shouldered screw (68), arm (67)
and cable block (12) from actuator assembly
(3).
Remove shouldered screw (69) and arm (67)
from cable block (12).
Remove setscrew (5) and cotter pin (65)
from pin (4). Discard cotter pin.
Remove pin (4) and washer (66) from arm
(67).
ASSEMBLY
Install washer (66) and pin (4) in arm (67).
Secure with new cotter pin (65).
Loosely install setscrew (5) in pin (4).
Install arm (67) on cable block (12) with
shouldered screw (69).
With shouldered screw (68), install arm (67)
and cable block (12) in actuator assembly
(3).
With two shouldered screws (72 and 73),
install arm (74) on cable block (12) and
actuator assembly (3).
Install two spring guides (71 ) in actuator
assembly (3) and on cable block (1 2).
Install spring (70) between two spring guides
(71).
21-61
|
