|
| |
21-8.
ENGINE AFES CYLINDER BOTTLE BRACKET STRAPS, BRACKETS, AND MOUNTS
REPLACEMENT (continued).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
b.
NOTE
Bracket straps on both engine AFES cylinder bottle brackets are removed the same
way.
Remove eight cotter pins (14 and 27), washers (13 and 26), and pins (11 and 24) and four bracket straps (12
and 25) from two cylinder bottle brackets (10 and 21). Discard cotter pins.
NOTE
. Cylinder bottle bracket No. 1 (10) must be removed prior to removing cylinder bottle
bracket No. 2 (21).
l Perform steps 2 through 4 to remove cylinder bottle No. 1 bracket (10).
l Perform steps 5 through 10 to remove engine cylinder bottle No. 2 bracket (21).
Remove four screws (15), Iockwashers (16), and cylinder bottle bracket (10) from mount (1). Discard
Iockwashers.
Remove screw (9), Iockwasher (8), washer (7), clamp (6), and electrical wiring harness (5) from mount (1).
Move wiring harness (5) clear of mount (1). Discard Iockwasher.
Remove two screws (4), Iockwashers (3), washers (2), and mount (1) from hull. Discard Iockwashers.
Remove two screws (28) and nuts (23), four Iockwashers (22), and cylinder bottle No. 2 bracket (21) from
support (20) and mount (17). Discard Iockwashers.
Remove two screws (19), Iockwashers (18) and mount (17) from hull. Discard Iockwashers.
Remove screw (40), Iockwasher (39), washer (38) from bracket (34) and hull. Discard Iockwasher.
Remove two screws (42) and Iockwashers (36), four washers (35), two nuts (37), shim(s) (41), from support
(20) and bracket (34). Discard Iockwashers.
Remove two screws (43) and Iockwashers (32), four washers (31), two nuts (33), support (20), and bracket
(34) from angle bracket (30). Discard Iockwashers.
Remove screw (44), Iockwasher (45), washer (29), and angle bracket (30) from hull. Discard Iockwasher.
INSTALLATION
NOTE
Cylinder bottle No. 2 bracket (21) must be installed before cylinder bottle No. 1
bracket (10).
21-26
|
