| |
21-6.
ENGINE AFES TUBING AND NOZZLES REPLACEMENT (continued).
b.
1.
2.
3.
4.
5.
6.
7.
8.
INSTALLATION
NOTE
Steps 1 through 6 cover installation of tubing and nozzles in engine compartment.
Steps 7 through 11 cover installation of tubing in crew compartment.
Install tube assembly (19) and adapter (24) on nozzle (23).
Install nozzle (23), with tube assembly (19) attached, in engine compartment with two screws (20), new
Iockwashers (21), and washers (22).
Install tee (25) in vehicle, and connect tube assembly (19) to tee (25).
Install tube assembly (15), strap (16), and two screws (18) and new Iockwashers (17) in vehicle.
Connect tube assembly (15) to tee (25).
Connect tube assembly (26) to bulkhead adapter (27) and tee (25).
Install elbow (13), hose (14), and double check-valve tee (9) on bulkhead adapter (1 2).
Connect two tube assemblies (8 and 10) to double check-valve tee (9).
21-19
TM 9-2350-287-20-2
|