|
| |
TM 9-2350-287-20-2
21-4.
ENGINE AFES CYLINDER BOTTLES REPLACEMENT (continued).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
NOTE
Engine AFES cylinder bottle assembly No. 1
engine AFES cylinder bottle assembly No. 2.
Disconnect hose (19) at elbow (20).
must be removed in order to remove
Disconnect elbow (20) and plug adapter (22) from discharge port of engine AFES cylinder bottle assembly
No. 1 (1).
Remove preformed packing (21) from elbow (20), and remove preformed packing (23) from plug adapter (22).
Discard preformed packings.
Install anti-recoil plug (17) in discharge port of cylinder bottle assembly No. 1 (1).
Remove electrical wiring harness (18) from rear of cylinder bottle assembly No. 1 (1).
Loosen two hex nuts (16) and release two straps (24).
Remove cylinder bottle assembly No. 1 (1) from bracket.
NOTE
For correct installation, note position of cylinder bottle assembly No. 2 on bracket.
Loosen two hex nuts (3), and rotate engine AFES cylinder bottle assembly No. 2 (2) counterclockwise until
elbow (10) is accessible.
Disconnect hose (9) from elbow (10).
Disconnect elbow (10) and plug adapter (12) from discharge port of cylinder bottle assembly No. 2 (2).
Remove preformed packing (11) from elbow (10), and remove preformed packing (13) from plug adapter (12).
Discard preformed packings.
Install anti-recoil plug (4) in discharge port of cylinder bottle assembly No. 2 (2).
Remove four screws (27) and cover (26) from actuator assembly (25).
Loosen two nuts (28) on engine AFES cylinder bottle cable (14).
Remove cotter pin (6), pin (5), and washer (8) to disconnect cable assembly (14) from manual valve actuator
(7) of cylinder bottle assembly No. 2 (2). Discard cotter pin.
Disconnect and remove cable assembly (14) from manual valve actuator (7) of cylinder bottle assembly No.
2 (2).
Release two straps (15) and remove cylinder bottle assembly No. 2 (2) from bracket.
21-8
|
