|
| |
TM 9-2350-287-20-2
20.1-5. GPS MOUNTING BRACKET ASSEMBLY REPAIR.
This Task Covers:
a. Removal
b. Installation
c. Assembly
d. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanic's tool kit (Item 24,
Vehicle parked on level ground (refer to
Appendix I)
TM 9-2350-287-10).
GPS receiver removed from mounting bracket
Materials/Parts:
(refer to TM 11-5825-291-13).
Lockwasher (3) (Item 153.1, Appendix H)
Lockwasher (8) (Item 173, Appendix H)
a.
REMOVAL
1.
Remove two screws (11), washers (12), and loop clamps (13) from mounting plate (14).
2.
Remove three nuts (4), lockwashers (5), washers (6), and screws (8) and adapter mount (9) from canister
compartment support (7). Discard lockwashers.
b.
DISASSEMBLY
1.
Remove four screws (23) and washers (24) and mounting p; t-: (14) from adapter mount (9).
2.
Remove eight nuts (3), lockwashers (2), and screws (1) and four isolators (25) from adapter mount (9). Discard
lockwashers.
3.
Remove fuse holder (17) and spare fuse (16) from mounting plate (14).
4.
Remove four screws (21) and washers (22) and block and gasket (10) from mounting plate (14).
5.
Remove four screws (19) and washers (18) and GPS mount (15) from mounting plate (14).
6.
Remove identification plate (20) from mounting plate (14).
Change 1 20.1-6
|
