|
| |
TM 9-2350-287-20-2
18-17. APU PLENUM REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic’s tool kit (Item 24,
• Vehicle parked on level ground (refer to
Appendix I)
TM 9-2350-287-10).
• APU compartment side door opened
Materials/Parts:
(refer to TM 9-2350-287-10).
• Lockwasher (6) (Item 196, Appendix H).
a.
REMOVAL
1.
Remove two screws (10), four washers (8), two Iockwashers (7), and nuts (6) from APU plenum (3). Discard
Iockwashers.
2.
Remove two screws (5) and Iockwashers (4) from APU plenum (3). Discard Iockwashers.
3.
Loosen two clamps (1) on hose (2), and push hose (2) free of plenum (3).
4.
Loosen clamp (16) on air duct hose (15), pull air duct hose (15) from generator air duct (17), and remove
plenum (3) from vehicle.
18-44
|
