|
| |
TM 9-2350-287-20-2
11-6. ROADWHEEL ARM REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic’s tool kit
• Vehicle parked on level ground (refer to
(Item 24, Appendix I)
TM 9-2350-287-10).
• Torque wrench, 0-600 ft-lb
• Roadwheel hub removed (para 11-5).
(Item 70, Appendix I)
• Torsion bar removed (para 11-2).
• Shock absorber removed (numbers 1 and
Materials/Parts:
7 roadwheel arms only) (para 14-2).
• Bolt (8) (Item 4, Appendix H)
Personnel Required: Two
a.
REMOVAL
1.
2.
b.
Remove eight bolts (1 ) from roadwheel arm
(2). Discard bolts.
WARNING
Roadwheel arm assembly weighs
over 100 pounds. TO prevent
serious injury, use two persons to
remove.
With the aid of an assistant, lift off roadwheel
arm assembly (2) and remove from vehicle.
INSTALLATION
With the aid of an assistant, position
roadwheel arm assembly 2) on vehicle and
secure with eight new bolts (1). Torque
between 170 and 180 ft-lb (230 and 244
N•m).
FOLLOW-ON MAINTENANCE:
• Install shock absorber (numbers 1
and 7 roadwheel arms only) (para 14-2).
• Install torsion bar (para 11-2).
• Install roadwheel hub (para 11-5).
11-16
|
