|
| |
TM 9-2350-287-20-2
11-5. ROADWHEEL HUB REPLACEMENT (continued).
e.
INSTALLATION
1.
Install relief valve (1) in roadwheel hub (2).
2.
Install new seal (6) in roadwheel hub (2).
3.
Install roadwheel hub (2), washer (12), and nut (10) on roadwheel arm spindle (5).
4.
Torque nut (10) to 100 ft-lb (136 N•m). Loosen nut (10) one full turn.
5.
Torque nut (10) to 30 ft-lb (41 N•m) while rotating roadwheel hub (2).
6.
Aline hole in nut (10) with hole in roadwheel arm spindle (5). If necessary, loosen nut (10) until holes are alined.
NOTE
After alinement of holes and insertion of cotter pin, hub must rotate freely by hand.
7.
Install new cotter pin (11 ) through nut (10) and roadwheel arm spindle (5).
11-14
|
