|
| |
TM 9-2350-287-20-2
17-30. UPPER REAR DOOR HYDRAULIC ACTUATOR TUBES, HOSES, AND FlTTINGS
REPLACEMENT (continued).
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
Install adapter (4) on tee (5).
Install elbow (1) on adapter (4).
Install elbow (2) on elbow (1).
Install self-locking nut (3) on elbow (2).
Install tube assembly (8) on adapter (9). Connect tube assembly (8) by turning elbow (2) and tightening self-
Iocking nut (3). Tighten tube assembly (8).
Install tube assembly (13) on tee (12).
Install adapter (15) on tube assembly (1 3).
Install valve (16) on adapter (1 3).
Install adapter (17) on valve (16).
Install tube assembly (18) on adapter (17) and tee (23).
Install elbow (6) on tee (5).
Install hose assembly (7) on elbow (6).
Install hose assembly (14) on tee (12).
Install two tube nipples (27) on two hose assemblies (7 and 14).
Connect two hose assemblies (7 and 14) to ceiling bracket (28).
Install two nuts (29) on two hose assemblies (7 and 14).
Install two tube assemblies (30 and 40) on two nuts (29).
Install two tube nipples (39) on two tube assemblies (30 and 40).
Install two tube assemblies (34 and 38) on two tube nipples (39).
Install two tube nipples (35) on two tube assemblies (34 and 38).
Connect two hoses (36 and 37) to two tube nipples (35).
Install three clamps (31 ) on two tube assemblies (34 and 38) and tube assemblies (30 and 40).
Install two new Iockwashers (32) and screws (33) on each of three clamps (31).
17-102
|
