| |
TM 9-2350-287-20-2
17-30. UPPER REAR DOOR HYDRAULIC ACTUATOR TUBES, HOSES, AND FlTTINGS
REPLACEMENT (continued).
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
b.
1.
2.
3.
4.
5.
Loosen tube assembly (8). Loosen locking nut (3), and turn elbow (2) to disconnect tube assembly (8).
Disconnect tube assembly (8) from adapter (9).
Remove locking nut (3) from elbow (2).
Remove elbow (2) from elbow (1).
Remove elbow (1) from adapter (4).
Remove adapter (4) from tee (5).
Remove tee (5) from tube assembly (8).
Remove tee (12) from adapter (11 ).
Remove adapter (9) and adapter (11) from pilot check valve (10).
Remove pilot check valve (10) from adapter (1 9).
Remove adapter (19) from flow-control valve (20).
Remove flow-control valve (20) from connector (21 ).
Remove connector (21 ) from tube assembly (22).
Disconnect tube assembly (22) from tee (23).
Remove tee (23) from adapter (24).
Remove adapter (24) from elbow (25).
Remove elbow (25) from nut (26).
INSTALLATION
NOTE
Apply Teflon pipe sealant to all male pipe threads prior to installation.
Install control valve (20) with metered flow arrow pointing toward rear of vehicle.
Install pilot check valve (1 O) with free flow arrow pointing toward front of vehicle.
Install nut (26) on elbow (25).
Install adapter (24) on elbow (25).
Install tee (23) on adapter (24).
17-100
|