| |
TM 9-2350-287-20-2
17-29.
UPPER REAR DOOR ACT UATOR MOUNTING BRACKET AND HYDRAULIC ACTUATOR REPLACEMENT
(continued).
14.
Repeat steps 8 through 13 on right side of pivot pin (22).
15.
Install doorstop handle (20) on left and right doorstops (6) with four screws (19), new lockwashers (18), and
washers (17).
16.
Install handle grip (21.1) on doorstop handle (20).
17.
Connect two hydraulic lines (9) to hydraulic actuator line disconnect bracket (10).
FOLLOW-ON MAINTENANCE:
Stow conveyor (refer to TM 9-2350-287-10).
Close lower rear door (refer to TM 9-2350-287-10).
Close upper rear door (refer to TM 9-2350-287-10).
Change 1 17-97
|