|
| |
TM 9-2350-287-20-2
17-29. UPPER REAR DOOR ACTUATOR MOUNTING BRACKET AND HYDRAULIC ACTUATOR REPLACEMENT
(continued).
10.
While assistant supports hydraulic actuator (8), remove two cotter pins (14), actuator pin (15), and two washers
(16) and spacers (13) from hydraulic actuator (8) and ceiling-mounted support bracket (11). Remove hydraulic
actuator (8) from vehicle. Discard cotter pins.
11.
Remove actuator rod eye (7) from hydraulic actuator (8).
NOTE
Perform step 11 only if bearing is damaged.
12.
Remove bearing (12) from ceiling-mounted support bracket (11).
Change 1 17-95
|
