|
| |
TM 9-2350-287-20-2
17-20. HYDRAULIC RESERVOIR REPAIR (continued).
8.
Install pipe bushing (42) and elbow (7) in
access cover (32).
9.
Install pipe (43) in access cover (32).
10.
Install new gasket (31 ) and access cover
(32) on reservoir (5) with 14 washers (33),
new Iockwashers (34), and screws (35).
11.
Install strainer (37), two gaskets (36), filler
flange (38), and filter and cap assembly
(41) on access cover (32) with six washers
(39) and screws (40).
12.
Install strainer (30), two gaskets (29), and
flange (28) on reservoir (5) with six washers
(25), new Iockwashers (26), and screws
(27).
NOTE
Perform step 12 only if fitting was
removed.
13.
Install fitting (18) on resevoir (5).
.
17-55
|
