|
| |
TM 9-2350-287-20-2
10.
11.
12.
Disconnect hose assembly (20) from
elbow (21).
Remove four screws (24), Iockwashers
(23), and washers (22) from reservoir
(5). Discard Iockwashers.
With the aid of an assistant, remove
reservoir (5) and two mounting plates
(19) from vehicle.
b.
DISASSEMBLY
NOTE
Perform step 1 only if fitting is
damaged.
1.
Remove fitting (18) from reservoir (5).
2.
Remove six screws (27), Iockwashers
(26), and washers (25), flange (28), two
gaskets (29), and strainer (30) from
reservoir (5). Discard Iockwashers.
17-51
17-20. HYDRAULIC RESERVOIR REPAIR (continued).
Loosen two clamps (15) on hose (14).
Remove two screws (12) and washers
(11) from plate (13) and bracket (10).
Remove hose (14) and plate (13) from
fitting (18) and bracket (10).
Disconnect hose assembly (6) from elbow
(7).
Disconnect electrical connectors CD and
664 (8 and 9) from transmitter (16) and
housing assembly (17).
|
