| |
TM 9-2350-287-20-2
16-8.
PERSONNEL HEATER FUEL FILTER AND TUBE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
l Drain pan (Item 14, Appendix I)
l GeneraI mechanic’s tool kit (Item 24,
Appendix I)
l Socket wrench set, 3/8-inch drive
(Item 57, Appendix I)
Materials/Parts:
l Cap and plug set (Item 13, Appendix D)
l Drycleaning solvent (Item 28, Appendix D)
l Rag (Item 56, Appendix D)
l Teflon pipe sealant (Item 63, Appendix D)
l Filter bowl assembly (Item 42, Appendix H)
l Lockwasher (2) (Item 194, Appendix H)
Equipment Conditions:
l Left and right projectile rack assemblies
moved to rear of vehicle (refer to
TM 9-2350-287-10).
l Numbers 1 and 2 engine AFES cylinder
bottles removed (para 21-4).
l Numbers 1 and 2 engine AFES cylinder
bottle bracket straps, brackets, and
mounts removed (para 21-8).
a.
REMOVAL
WARNlNG
l Fuel is very flammable and can explode easily. To avoid serious injury or death,
keep fuel away from open flame. When working where fuel is present post signs
that read “No Smoking Within 50 Feet of Vehicle.”
l In the event of fire in the engine or crew compartment be prepared to use the
portable fire extinguisher and/or manually operate the automatic fire extinguisher
system (AFES).
1.
Position drain pan under heater fuel inlet hose (2). Disconnect heater fuel inlet hose (2) at fuel filter elbow (1).
16-18
|