|
| |
TM 9-2350-287-20-2
15-90. LEFT CANISTER RESTRAINTS REPAIR (continued).
c.
INSPECTION
Inspect all parts for cracks, bends, breaks, rips, or tears. Replace any damaged parts.
d.
ASSEMBLY
WARNING
Sealing compounds can burn easily, can give off harmful vapors, and are harmful
to skin and clothing. To avoid injury or death, keep sealing compound away from
open fire and use in a well-ventilated area. If sealing compound gets on clothing,
wash immediately with soap and water.
1.
Apply sealing compound to threads of four screws (27) and install with four new lockwashers (28) and two slides
(33) on each of two restraint bar assemblies (13).
2.
Install eight screws (29), washers (31), and new lockwashers (30), restraint strap (14), and two fasteners (32) on
each of two restraint bar assemblies (13).
e.
INSTALLATION
1.
Install four strap studs (20) on shelf (26).
2.
Position two strap assemblies (18) on shelf (25).
3.
Hook two ratchet buckle assemblies (17) and snaphooks (19) on four strap studs (20).
4.
Tighten two strap assemblies (18) to secure two ratchet buckle assemblies (17).
5.
Install eyebolt (16) on each of four bar slide tracks (9) with washer (3), new lockwasher (2), and nut (1).
6.
Install two restraint bar assemblies (13), with two attached restraint straps (14), on four ba r slide tracks (9).
7.
Hook four snaphooks (12) onto four eyebolts (16), and tighten two restraint straps (14) by pulling end of restraint
strap (14).
8.
Insert clip end of each of two straps (10) through fasteners (8) on left canister compartment shelf assembly (7),
and secure each of two spring-action buckles (11).
Change 1 15-238
|
