|
| |
TM 9-2350-287-20-2
15-90. LEFT CANISTER RESTRAINTS REPAIR.
This Task Covers:
a. Removal
b. Disassembly
c. Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
Lockwasher (4) (Item 165, Appendix H)
General mechanic's tool kit
Lockwasher (16) (Item 196, Appendix H)
(Item 24, Appendix I)
Equipment Conditions:
Materials/Parts:
Vehicle parked on level ground
Sealing compound (Item 58, Appendix D)
(refer to TM 9-2350-287-10).
Lockwasher (8) (Item 144, Appendix H)
a.
REMOVAL
1.
Release spring-action buckle (5) from clip end of each of five straps (6). Grasp each buckle (5) and pull each
strap (6) through upper rack and vehicle-mounted fasteners (4).
2.
Release each of seven spring-action buckles (22) from clip end of each of seven straps (21). Grasp each buckle
(22) and pull each strap (21) through fasteners (24) on shelf (25) and stowage box (23).
3.
Release each of two spring-action buckles (11) from clip end of each of two straps (10). Grasp each buckle (11)
and pull each strap (10) through fasteners (8) on left canister compartment shelf assembly (7).
4.
Push release plate of each of two buckles (15) to loosen two restraint straps (14), and unhook each of four
snaphooks (12) from four eyebolts (16).
5.
Remove two restraint bar assemblies (13), with two attached restraint straps (14), from four bar slide tracks (9).
6.
Remove nut (1), lockwasher (2), washer (3), and eyebolt (16) from each of four bar slide tracks (9). Discard
lockwashers.
7.
Release two ratchet buckle assemblies (17) to release tension of two strap assemblies (18).
8.
Unhook two ratchet buckle assemblies (17) and two snaphooks (19) from four strap studs (20).
9.
Remove two strap assemblies (18) from shelf (25).
10.
Remove four strap studs (20) from shelf (26).
Change 1 15-236
|
