| |
TM 9-2350-287-20-2
15-87. RIGHT REAR CANISTER COMPARTMENT SHELVES AND SUPPORTS
REPLACEMENT (continued).
19.
Remove bracket (81 ) from support (44).
20.
Remove eight screws (77), Iockwashers (76), and washers (75), two brackets (74), and front post (14) from
vehicle hull. Discard Iockwashers.
21.
Remove two brackets (74) from front post (14).
b.
INSTALLATION
NOTE
An assistant is needed for installing shelves.
1.
Install two brackets (74) on front post (14).
2.
Install front post (14) and two brackets (74) on vehicle hull with eight screws (77), new Iockwashers (76), and
washers (75).
3.
Install bracket (81 ) on support (44).
4.
Install support (44) and bracket (81 ) on vehicle hull with two screws (84), new Iockwashers (83), and washers
(82).
5.
Install support (44) on front post (14) with two screws (85), washers (78), new Iockwashers (79), and nuts (80).
NOTE
Do not tighten screws until after rear post has been secured to bottom shelf.
6.
Install rear post (69) on support (44) with four screws (65), washers (66), new Iockwashers (67), and nuts (68).
7.
Secure rear post (69) to bottom shelf (56) with four screws (70), washers (71), new Iockwashers (72), and nuts
(73). Tighten screws (65).
15-229
|