|
| |
TM 9-2350-287-20-2
10-4. DRIVER’S COMPARTMENT BRAKE ASSEMBLY REPAIR (continued).
9.
10.
11.
12.
Install new boot (23) on parking brake
latch assembly (26) with new retaining
ring (22).
Tighten two setscrews (28) in actuator
(27).
Install pin (30) in brake pedal (32) and
secure with two new cotter pins (31 ).
Install screw (24), two washers (25),
and new self-locking nut (29) on brake
pedal (32).
e.
INSTALLATION
1.
Position brake assembly (21) and
required shims (15) in place and secure
with four screws (20), new Iockwashers
(19), and washers (18).
2.
Connect two electrical connectors (16)
to brake warning light switch (17).
10-15
|
