| |
TM 9-2350-287-20-2
15-82. PROJECTILE RACK BASE, SUPPORTS, AND VEHICLE WALL-MOUNTED
RESTRAINTS REPLACEMENT (continued).
a.
INSTALLATION
NOTE
For correct positioning at installation, aline restraints and supports with scribe marks.
Ensure that shims are installed in proper number and location.
1.
Install mounting bracket (24) on rack base (30) with screw (25), new Iockwasher (26) and washer (27).
2.
Install rack base (30) on vehicle floor with 16 screws (31), new Iockwashers (32), washers (33), and washer
shims (28).
3.
Install two screws (21 ), new
Iockwashers (22) and washers
(23) on mounting bracket (24).
4.
Install right and left rear base
supports (13) with four screws
(16), new Iockwashers (15),
and washers (14).
5.
Install right and left front base
supports (20) and two angles
(29) on vehicle floor with 10
screws (17), new lockwashers
(18), and washers (19).
15-201
|